Bostik PanelTack™ Wall Panel and Façade Cladding System is an innovative cladding attachment adhesive solution designed for secure and long-lasting invisible fixation of rainscreen panels. The adhesive system prevents the panels from sagging under their weight and absorbs cyclical expansion and contraction due to environmental changes, such as wind, temperature, and humidity.
Bostik PanelTack™ System is suitable for fixing a range of rainscreen materials, including our lightweight and durable Steni and Petrarch composite stone rainscreen panels.
PanelTack™ FoamTape™ acts as a spacer, maintaining the correct thickness between panels and the support structure. Compatible with a wide range of panels and wall cladding materials, FoamTape™ provides an initial fixation of the panel or substrate until the PanelTack HM™ adhesive fully cures, ensuring a secure lasting bond.
PanelTack HM™ is a versatile, highly elastic adhesive with a smooth, uniform texture, designed for discreetly bonding a variety of façade and decorative panels.
Primer PanelTack™ is a multi-purpose cleaner and primer that is used to clean and prime the back of façade and decorative panels, and on aluminum and stainless steel support constructions.
VaproShield designs and manufactures high performance, vapor permeable, water resistive barriers (WRB) and air barrier (AB) systems and accessories, creating a total solution-based approach to protecting the building envelope.
Our innovative WRB/AB mitigate moisture damage and control air infiltration (air barrier) leading to a lifetime of improved indoor air quality and energy savings. VaproShield membranes are compatible with a host of substrates and cladding materials, can be installed in virtually all weather conditions and offer lower installed costs, less inventory and minimal field training.
A vapor permeable, self-adhered water resistive barrier membrane that protects the building envelope by allowing vapor to pass through (breathable) but not air or liquid water
Patent-Pending, Black, UV Stable Water Resistive Vapor Permeable Self-Adhered Air Barrier Membrane for Open Joint Rain Screen Cladding Systems
A mechanically attached, water resistive (WRB) vapor permeable air barrier (AB) membrane with built-in rain screen drainage matrix and integrated tape at the horizontal seams.
Lightweight, Self-Adhered Air, Water, and Vapor Barrier Membrane
VaproLiqui-Shield is a high performance fluid-applied vapor permeable water resistive barrier/air barrier that protects the building envelope by allowing vapor to pass through (breathable) but not air or liquid water
From exterior wall assemblies to below-grade and specialty applications, PowerWool RigiBoard provides a durable, fire-safe, and vapor-open solution for modern high-performance construction.
All boards are available in 16″x48″ or 24″x48″ sizes, with thicknesses ranging from 1″ to 5″ thick
PowerWool RigiBoard is designed for versatility across a wide range of building assemblies, including:
RigiBoard™ 80 is a continuous, non-structural and noncombustible rigid mineral wool insulation designed for exterior applications.
PowerWool CavityBoard™ is a semi-rigid mineral wool insulation board engineered for exterior cavity wall and rainscreen applications. Designed for high-performance building envelopes, CavityBoard™ provides long-term durability, fire safety, and moisture resilience.
PowerWool™ CurtainBoard™ is a rigid mineral wool insulation board designed for perimeter fire containment applications in spandrel panels and mullion covers. Engineered for high-rise and commercial curtain wall systems, CurtainBoard™ provides noncombustible fire resistance, moisture resilience, and long-term dimensional stability.
PowerWool was designed to offer the contractor a greater compression strength to ensure straighter walls while providing exceptional fire-resistance and vapor permeability.
More compression resistant than competitors, yet still flexible enough to let siding lay flat.
At R-4 per inch, Powerwool helps achieve most US and Canadian energy code and passive house requirements.
Rigid mineral wool allows trapped moisture to safely escape from your walls for exceptional drying potential.
Tenmat FF102/50 Intumescent Fire Block is a rigid, highly expansive intumescent strip designed to maintain the open ventilated cavity in normal conditions. During a fire, the intumescent strips will expand to seal off the cavity and block the fire.
Tenmat FF102/50 Fire Block strips for ventilated rainscreen systems are high expansion intumescent seals offering industry-leading performance as an ‘open state’ cavity fire barrier. The FF102/50 can be mechanically fixed horizontally and vertically within ventilated cavities behind rainscreen or cladding systems. The FF102/50 can be used within concealed cavities and air gaps of up to 2″ (up to 1 3/4″ open space between the face of the fire block and the cladding). For larger cavities please contact us.
JointJig is designed to provide the installer with perfectly spaced open rainscreen joints every time. Patent No. EP3990713. Patent No. D938,269
TRUFAST® manufactures innovative insulation fastening systems for the exterior building envelope
Grip-Deck TubeSeal™ with Thermal-Grip Washer + HiLo Thread Screw
Grip-Deck TubeSeal™ with Self-Drilling Screw
Grip-Lok® MW Plate
Thermal-Grip® Flat Washer
The Grip-Deck TubeSeal™ is designed to help seal blind fastener penetrations of WRB and air-barrier when mechanically attaching continuous insulation. The Grip-Deck TubeSeal™ fasteners with Thermal-Grip washers enable sealing the WRB or air barrier sandwiched between the substrate and the layer of continuous insulation.
The Grip-Deck TubeSeal™ is designed to help seal blind fastener penetrations of WRB and air-barrier when mechanically attaching continuous insulation. The Grip-Deck TubeSeal™ fasteners with Thermal-Grip washers enable sealing the WRB or air barrier sandwiched between the substrate and the layer of continuous insulation.
The Grip-Lok® MW Plate is a versatile mineral wool attachment solution, allowing you to attach mineral wool to any substrate including wood, steel, or concrete. The plate can be either shot in, screwed in, or nailed in and can attach mineral wool thicknesses up to 5″.
Building Wrap Fastening Washer:
"*" indicates required fields
"*" indicates required fields
